AV container with butterfly valve
NCS has been assisting manufacturers since 1976 in the development of their powder container installation project. Among the models of IBC containers offered, you can find the cubic container NCS-AV. It offers many possibilities of protection and storage of your solid bulk (powder).
The AV container is characterised by residue-free emptying, easy cleaning and optimised storage space.
With a wide range of models and a robust construction, the cubic container in steel, stainless steel or aluminum will meet all your requirements.
| Type | Volume | Height | Section | Slope | Homologation | Notice |
|---|---|---|---|---|---|---|
| AV01C | 965 to 3240 L | 1420 to 2980 mm | 1125x1325 mm | 59°/64° | UN/ADR | {https://www.nordtole-cs.com/wp-content/uploads/2024/02/AV01C.pdf} |
| AV02C | 300 to 500 L | 975 to 1235 mm | 808x1008 mm | 56°/63° | {https://www.nordtole-cs.com/wp-content/uploads/2024/02/AV02C.pdf} | |
| AV03C | 800 to 3000 L | 1170 to 2690 mm | 1125x1325 mm | 52°/57° | UN/ADR | {https://www.nordtole-cs.com/wp-content/uploads/2024/02/AV03C.pdf} |
| AV04C | 600 to 1480 L | 1195 to 1860 mm | 1000x1200 mm | 59°/65° | {https://www.nordtole-cs.com/wp-content/uploads/2024/02/AV04C.pdf} |
- Long service life
- Can be reused again and again
- 100% recyclable
- Transport of dangerous substances on road (UN)
- Standard CE1935/2004 for the food industry
- Ensure efficient drainage with angled hopper
- Be easy to clean with full penetration welds (no retention zone)
- Optimize loading volume
- Stackable three high (two on one) using stacking corners
- Handle by forklift or pallet truck safely
- Lifting with a cargo beam using the lifting lugs
- Hermetic container : perfect seal with a wide choice of seals of a nature and hardness compatible with your products
- Protects against UV radiation
Our engineering design office is at your disposal to configure your container :Â
- Dimensions (height, floor section)
- Accessories (cover, clamp, valve, outlet connection, label support, vibrator, top inlet)
- Finishes (pickling/passivation, RAL paint colour of your choice
- Discharge cone
- Adaptation system on drain valve for pneumatic opening/closing
- Design compliant with ATEX Z22 standard
- Vibrator support
- Stainless steel sleeve under drain valve
- Inner coating to facilitate flow
- Tracking system (RFID chip, barcode)
The NCS-AV cubic container for powdered products is available in a variety of materials:
- 304L, 316L and 316TI STAINLESS STEEL for applications
- S235, S355 STEEL
- 5754, 6081 T6 ALUMINIUM
The NCS-AV cubic container has a 300 to 3,240 litre useful capacity. Our engineering design office can provide customization services to meet your company’s container needs.
Our cubic container for powdered products has many other features suitable for different sectors:
- Self-supporting design
- Emptying through butterfly valve in diameters from DN150 to DN300
- Inner access via manhole (DN 400 or DN460)
- Wide range of seals (silicone, Viton, EPDM, PTFE)
- Fixed or removable handling base with lugs on four sides, available in 304L and 316L stainless steel, and painted or galvanized steel
- Stacking corners/lifting lugs
Various closure alternatives are available depending on your needs:
- Flat cover with bolt clamp or lever clamp
- Hinged cover with six swing bolts
